BendPak XPR-10XLS Service Manual

Safety Instructions: If attachments, accessories, or conguration-modifying components that are
located in the load path affect operation of the lift, affect the lift electrical listing, or affect intended
vehicle accommodation are used on this lift and, if they are not certied for use on this lift, then the
certication of this lift shall become null and void. Contact the participant for information pertaining
to certied attachments, accessories, or conguration-modifying components.
BendPak lifts are supplied with concrete fasteners meeting the criteria as prescribed by ASTM E488/
E488M-18. Lift buyers are responsible for any special regional, structural, and/or seismic anchoring
requirements specied by any other agencies and/or codes such as the Uniform Building Code (UBC)
and/or International Building Code (IBC).
The manufacture, use, sale, or import of this product may be subject to one or more United States
patents, or pending applications, owned by BendPak Inc.
1645 Lemonwood Dr.
Santa Paula, CA USA
www.BendPak.com
LIFT TYPE: Surface Mount MANUFACTURER: BendPak. See data plate for product details
POWER: Electric/Hydraulic INSTALLATION: See manual or contact factory
Do Not Remove Engineered by BendPak Inc., USA Made in China
PN 5905940
2-Post Lifts (ALI approved) Product Decal Positioning
C
PN 5905940
Product_Data_Label_5905940.pdf:
Size: 4.5"W x 2.75"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No Gloss)
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital
Lamination: Clear Laminate non-glare medium matte over laminate for
abrasion, chemical, and ultra violet protection.
*D
*DEPENDS ON LIFT
MODEL AND CAPACITY
P/N 5905401 - Max Cap. Danger 7k ENG-FRE
P/N 5905402 - Max Cap. Danger 9k ENG-FRE
P/N 5905403 - Max Cap. Danger 10k ENG-FRE
P/N 5905404 - Max Cap. Danger 12k ENG-FRE
P/N 5905405 - Max Cap. Danger 15k ENG-FRE
P/N 5905406 - Max Cap. Danger 18k ENG-FRE
*Max. Cap. Danger ENG-FRE.pdf:
Size: 4"W x 8.5"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No Gloss)
Print Process: Offset Lithography - 200 line-screen or
300 p.p.i. for digital
Lamination: Clear Laminate non-glare medium matte
over laminate for abrasion, chemical, and ultra violet
protection.
DANGER
Exceeding the weight capacity of this lift can damage lift and/
or property and may cause personal harm, injury or death to
operators and/or bystanders. All vehicles MUST be positioned
on lift with CENTER OF GRAVITY midway between adapters
and/or centered on runways. Damage to lift due to
overloading or misuse IS NOT covered under warranty.
Le dépassement de la capacité de poids de cet élévateur peut
endommager l’ascenseur et / ou les biens et peut causer des
dommages corporels, des blessures voire la mort aux opéra-
teurs et / ou aux passants. Tous les véhicules DOIVENT être
placés sur l’élévateur avec le CENTRE DE GRAVITÉ à mi-chemin
entre les adaptateurs et / ou au centre des pistes. Dommages à
soulever dus à la surcharge ou une mauvaise utilisation N’EST
PAS couverte par la garantie.
THE MAXIMUM LIFTING CAPACITY
FOR THIS LIFT IS DESCRIBED BELOW
LA CAPACITÉ DE LEVAGE MAXIMUM
POUR CE LEVAGE EST DÉCRIT CI-DESSOUS
Maximum Lifting Capacity
7,000 lbs. / 3,175 kg
Capacité de Levage Maximale
7,000 lbs. / 3,175 kg
Max. Lifting Cap. / Front of Lift Center
3,500 lbs. / 1,588 kg
Max. Capuchon De Levage. / Avant du centre de relèvement
3,500 lbs. / 1,588 kg
Max. Lifting Cap. / Rear of Lift Center
3,500 lbs. / 1,588 kg
Max. Capuchon De Levage. / Arrière du centre de levage
3,500 lbs. / 1,588 kg
P/N 5905401
*NRTL Lifting Cap ENG-FRE.pdf:
Size: 4.5"W x 3.25"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No Gloss)
Print Process: Offset Lithography - 200 line-screen or 300
p.p.i. for digital
Lamination: Clear Laminate non-glare medium matte over
laminate for abrasion, chemical, and ultra violet protection.
*E
P/N 5905645 - NRTL_Lifting_Cap_7K_ENG-FRE
P/N 5905650 - NRTL_Lifting_Cap_9K_ENG-FRE
P/N 5905655 - NRTL_Lifting_Cap_10K_ENG-FRE
P/N 5905660 - NRTL_Lifting_Cap_12K_ENG-FRE
P/N 5905670 - NRTL_Lifting_Cap_15K_ENG-FRE
P/N 5905675 - NRTL_Lifting_Cap_18K_ENG-FRE
ATTENTION
MAXIMUM LIFTING CAPACITY
CAPACITÉ DE LEVAGE MAXIMUM
P/N 5906005
6000 Lbs.
2722 Kg.
IMPORTANT: Please use materials as instructed

BendPak XPR-10XLS Specifications

General

Brand	BendPak
Model	XPR-10XLS
Category	Lifting Systems
Language	English