XPR-9 Series Two-Post Lifts
18
P/N 5900371 — Rev. D2 — May 2023
• Concrete Specifications XPR-9SBT Only. The XPR-9SBT is designed for flush mount and
must be recessed, as per the figure below.
• Unloading the components. Unload the Lift components as close to the installation location
as possible. The Lift includes a number of heavy pieces, so the closer you unload them to the
installation location, the better off you will be.
⚠ WARNING Some Lift components are very heavy; if handled incorrectly, they can damage
materials like tile, sandstone, and brick. Try to handle the Lift components just
twice: once when delivered and once when moved into position. You must have a
Forklift or Shop Crane to move some of the Lift components into position. Use
care when moving Lift components.
To Next Page
Loading...
