BendPak XPR-9 Series User Manual

XPR-9 Series Two-Post Lifts 54 P/N 5900371 — Rev. D2 — May 2023
Lubricating the Lift
Your Lift will operate better and longer if you keep the Posts lubricated.
Lubricate the following:
• Cable sheave pins, with WD-40 or equivalent.
• The four inside corners of both Posts, with white lithium grease. Apply to all areas that contact the
slide blocks.
Lubricate both top and bottom
slide block areas on both
p
osts.

BendPak XPR-9 Series Specifications

General

Brand	BendPak
Model	XPR-9 Series
Category	Lifting Systems
Language	English