V 1.00 12 5139 en
2.7 Personnel qualifications
The product to which these instructions belong must only be handled by personnel who
are qualified for the respective task.
The owner must ensure that the personnel performing the tasks at hand have the
required qualifications.
A clear distinction must be made between personnel responsibilities for the task.
Before using the product, the operator must arrange and successfully carry out the
required training courses, further education and instructions that the personnel require.
Inadequately qualified personnel are a risk factor for which the owner of the product is
liable.
Specialists / experts in the context of the accident prevention regulations are people
who can assess the work that has been assigned to them and recognise potential
dangers based on their technical training, knowledge, experience and knowledge of the
applicable regulations.
Qualified electrical professionals/ electrically skilled person in the context of these
notes are persons who are familiar with setup and installation, commissioning, operation,
maintenance and dismantling, and who have the appropriate qualifications.
The maintenance of the charger must only be carried out by qualified and authorised
qualified electricians.
Further education or training for personnel is available from the manufacturer or
supplier.
Electrically skilled persons in the context of this information are people who are familiar
with assembly and installation, commissioning, operation, maintenance and dismantling,
and who have the appropriate qualifications. They are responsible for compliance with
the applicable standards and regulations.
Electrically skilled person with AuS certification are responsible for compliance with
existing standards and regulations, particularly VDE 0105, DGUV Regulation 3 and
DGUV Rule 103, or the national rules and regulations. This certification is required so that
work on live parts of electrical systems and operating equipment (live-line working) can
be performed safely.
2.8 Qualifications for installation and maintenance
The electrical installation and maintenance work may only be carried out by a qualified
electrician in accordance with the electro-technical regulations.
In these instructions, these chapters are marked with the following note.
To Next Page
Loading...