Benning BELATRON - Safety Checking in Accordance with DGUV Regulation 3; Decommissioning and Dismantling; Disconnecting the Charger from Infeeds

V 1.00 39 5139 en
10.6 Safety checking in accordance with DGUV regulation 3
Contact the manufacturer’s service department.
11 Decommissioning and dismantling
Electrically skilled person
DANGER
Danger to life due to electric shock
High voltages can lead to death.
 Switch off all the feeders and secure them against being switched
back on again!
 Check that the system is free of voltage!
 Use appropriate personal protective equipment.
 Remove watches, rings, chains or similar conductive parts from your
body or clothing.
 Observe chapter 2.12, Safety rules according to EN 50110 /
NFPA 70E / VDE 0105, page 15.
11.1 Disconnecting the charger from infeeds
Disconnect the charger from the mains.
Disconnect the charger from the machine.
Observe chapter 2.12, Safety rules according to EN 50110 / NFPA 70E /
VDE 0105, page 15.