Benning BELATRON - 1 Basic Information; Target Group; Applicability; Storing the Documents

V 1.00 7 5139 en
1 Basic information
These instructions must be read in full and understood by all persons who
work with the product.
These instructions contain important information, which must be followed
during operation.
For safe operation of the product, knowledge is required that is provided in these
instructions. The information is shown in a brief, clear format, and the chapters and pages
are numbered consecutively.
The products are subject to continuous further development. The manufacturer reserves
the right to make changes to the product’s design, configuration and technology. The
information corresponds to the state of technical knowledge at the time of printing. For
this reason, no claims for certain product characteristics can be derived from the contents
of this documentation.
The owner, installers, service engineers and users must have access to these
instructions at all times. They contain the most important instructions for operating the
product described in these instructions in a safe and proper way.
 Special attention must be paid to the safety instructions in particular.
 The safety instructions and warnings on the product must not be tampered with.
 The applicable accident prevention and environmental protection rules and
regulations must be observed at the usage location of the product.
1.1 Target group
These instructions are intended for the owner, installers, service engineers and users.
1.2 Applicability
These instructions may only be used for the product described.
1.3 Storing the documents
Please look after this user manual carefully.
This user manual can be archived and distributed as a PDF file. A printout
should be kept with the product.
In the event of a change of owner, the instructions must be passed onto the successor.
1.4 Purpose of the instructions
The owner, installers, service engineers and users must be familiar with the installation,
operation and maintenance of the product.
Further information which goes beyond the scope of these instructions must be requested
from the manufacturer or supplier.
1.5 Special information
This is a product for commercial and industrial use. Restrictions
concerning the installation or additional measures may be required to
prevent faults from occurring.
1.5.1 Description of the accumulator
The accumulator will be referred to as a ‘battery’ in these instructions and in the display
units. To improve readability, we have refrained from consistently using differentiating
formulations.