EasyManua.ls Logo

Benning BELATRON - Fire Protection; Identification; Type Plate (Example); Figure 2-1: Type Plate

Benning BELATRON
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
V 1.00 16 5139 en
2.13 Fire protection
WARNING
Fire, open flames and smoking are prohibited in the operating room. Inflammable
materials or explosive substances are not to be stored in the operating room.
The operating and maintenance personnel must be demonstrably instructed in how to
behave in the event of fire at regular intervals in compliance with NFPA 70 and the
national regulations.
Firefighting in electrical systems must be carried out in accordance with
VDE 0132, NFPA or national standards such as OSHA 1910 para. E or
existing NFPA standards.
Rescuing people takes precedence over preventing property damage.
Alert the fire brigade/rescue teams.
Electrical devices must be maintained for fire prevention at regular intervals
in accordance with IEC / EN 61557 or country-specific regulations.
Isolate the unit immediately in the event of smell or smoke development or
fire in accordance with the regulations!
Notify the person responsible and the maintenance personnel and initiate
firefighting measures if necessary.
2.14 Identification
2.14.1 Type plate (example)
Figure 2-1: Type plate
The exact technical data can be found on the type plate on the charger and
the information on the technical data in the appendix.

Table of Contents