Benning BELATRON - Legal Information; Warranty; Disclaimer; Software Changes

V 1.00 8 5139 en
1.6 Legal information
1.6.1 Warranty
Warranty or guarantee claims and the warranty period depend on the respective
contractual relationship, as well as the general terms and conditions of the manufacturer.
Details about the manufacturer’s warranty can be found in the contractual agreements.
Warranty and liability claims are generally excluded if the damage is the result of
defective assembly, improper use or force majeure. The information in these instructions
was checked carefully. However, no liability can be assumed for errors.
1.6.2 Disclaimer
The manufacturer has checked the contents of the instructions for correspondence with
the hardware and software that is described. Nevertheless, errors cannot be ruled out, so
the manufacturer cannot guarantee complete correspondence. The contents of these
instructions are checked at regular intervals, and any corrections that are needed are
contained within the versions that follow.
Any misuse of the product shall lead to termination of the guarantee, the warranty and the
manufacturer’s general liability.
The manufacturer is not liable for damage resulting from failure to follow these
instructions.
Any use other than that described in the manual is considered to be incorrect. The
manufacturer is not liable for resulting damage. Modifications to the product or the
manual are prohibited.
1.6.3 Software changes
If software changes are made without the manufacturer’s knowledge and approval, the
right to liability and warranty claims shall be invalidated.
1.6.4 Hardware changes
If changes are made to the housing or other components of the product without the
manufacturer’s knowledge and approval, the right to liability and warranty claims shall
cease.
1.6.5 Figures and drawings
For general illustrative purposes, this user manual includes illustrations and drawings.
The functional options and representations may differ from the actual product.
1.6.6 Trademarks
All trademarks that are used are the property of their respective owners, even if they are
not separately marked as such.
1.6.7 Legal claims
Any liability on the part of the manufacturer for consequential damage arising from
improper use or incorrect installation of the product is expressly excluded.
1.6.8 Declaration of conformity
A corresponding declaration of conformity is kept available for the relevant
authority on the manufacturer’s premises and can be obtained on request.