Malfunctions can be caused by incorrect storage.
For this reason, please observe the conditions specified.
The product must be stored in a suitable location, and in particular never left
unprotected outdoors. It is advisable to store the product in dry, dust-free rooms
and away from chemical substances.
Because condensation might form, it must be ensured that the product is not
subjected to large temperature differences during storage. Temperature
fluctuations greater than 20 K per hour are impermissible.
Please refer to the technical data for the values for a suitable storage temperature.
The values in the technical data must not exceed or fall below the given limits.
Please refer to the technical data for the relative humidity (non-condensing) values.
The specified values must not be exceeded.
If the product is stored at high humidity for an extended period of time, allow it to
dry out for more than one day before connecting it to the power supply.
To Next Page
Loading...