Risk of injury due to toppling over, falling or swinging
The unit can tip over or fall due to careless or excessively fast lifting and
transport.
Always transport the unit as close as possible to the ground.
Use all attachment points for transport.
Only use means of transport and lifting gear that is designed for the
weight of the unit.
Avoid making fast and jerky movements during transport.
Always maintain a sufficient safety distance from the unit.
Property damage due to transport
The unit can be damaged by careless transport.
The unit must be securely packed for transport
Do not subject the unit to shocks
Each component is delivered by the manufacturer in electrically and mechanically perfect
condition. The transport company is responsible for any transport damage.
The sales/service department of the manufacturer/supplier must be notified
of transport damage immediately in writing (within 6 working days of receipt
of the goods at the latest)
The product may only be transported to the intended location in its original
packaging. Attention must be paid to securing the load.
The product may only be transported and stored in an upright position. The transport
position must be secured during transport. Attention must be paid to the product’s
centre of gravity. With this product, slight changes in position can lead to individual
components suddenly toppling due to the heavy weight.
It must also be ensured that the product is securely positioned when in storage.
Lifting belts must be used when transporting the product in an unpacked state. They
must be positioned so that no damage can occur.
To Next Page
Loading...