BenQ CP6501K - User Manual

Other manuals for BenQ CP6501K

Questions and Answers

A
Alyssa ShahSep 2, 2025
How to fix a strange computer input image on a BenQ Monitor?
- U
  umurphySep 2, 2025
  If your BenQ Monitor displays a computer input image that looks strange, first verify that the computer's output resolution is supported (refer to Supported input signal resolution on page 113). If using VGA, try the Auto function to automatically optimize the display. If the Auto function doesn't provide a satisfactory result, manually adjust the image using the Phase, H Position, and V Position functions.
M
Mallory WilliamsAug 31, 2025
What causes remote control failure in a BenQ Monitor?
- D
  David OsbornAug 31, 2025
  If your BenQ Monitor's remote control fails, check for obstructions between the remote and the receiving window on the monitor. Also, verify the battery polarity in the remote control is correct and replace the battery if necessary.
C
Christopher WattsAug 29, 2025
Why is my BenQ Monitor remote control not working?
- M
  Mark MeyerAug 29, 2025
  If the remote control for your BenQ Monitor isn't working, try these steps: First, ensure the remote control function is unlocked. Then, check the battery orientation and replace dead batteries if needed. Make sure you're within range and pointing the remote at the display's sensor, with no obstructions. Avoid strong fluorescent lighting or direct sunlight on the sensor. Also, turn off any nearby devices (like computers or PDAs) that might be transmitting infrared signals and causing interference.
S
Sarah SandersAug 27, 2025
What to do if BenQ Monitor image color is weak?
- T
  Tracy BatesAug 27, 2025
  If the BenQ Monitor shows no color, weak color, or a weak image, adjust the chromaticity and brightness or contrast in the menu. Also, check that the signal wire is securely connected.
A
amber95Aug 26, 2025
What does 'Signal out of range' mean on a BenQ Monitor?
- J
  Jennifer PowersAug 26, 2025
  If you see 'Signal out of range' on your BenQ Monitor, verify that the display is set correctly. Check if the resolution is set to the optimal resolution. You can also adjust line and field synchronization in the menu.
G
gfrenchAug 25, 2025
Why does my BenQ Monitor automatically shutdown?
- J
  Jennifer GilbertAug 25, 2025
  If your BenQ Monitor automatically shuts down, check if a sleep timer is set. Also, check for sudden power outages. Finally, determine if the monitor is set to automatically shut down when there is no signal.
N
Nathan DanielsAug 22, 2025
What to do if my BenQ Monitor has no sound?
- M
  Mr. Aaron GreenAug 22, 2025
  If your BenQ Monitor has no sound, check these items: Ensure that the mute function is not enabled on either the display or the input source device. If it is, turn it off or increase the volume. Also, check that all cable connections are secure.

BenQ CP6501K Specifications

General

Display Size	65 inches
Brightness	350 nits
Contrast Ratio	1200:1
Response Time	8 ms
Viewing Angle	178°/178°
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Power Consumption	220W
Standby Power Consumption	<0.5W
Weight	32 kg
VESA Mount	400 x 400 mm
Built-in Speakers	Yes
Resolution	3840 x 2160
Connectivity	HDMI, USB, LAN
Display Type	LED