71
Remote control does not work correctly.
The batteries are out of power. Replace both of the batteries with new ones.
There is an obstacle between the remote
control and the projector.
Remove the obstacle.
You are too far away from the projector. Stand within 8 meters (26.2 feet) of the projector.
The projector cannot connect to the desired
SSID.
The handshaking between the projector and
the router does not follow IEEE 802.11
protocols.
• For 2.4G frequency, make sure the wireless mode of
the router is configured as 802.11g/n or 802.11n.
• For 5G frequency, make sure the wireless mode of
the router is configured as 802.11n.
Problem Cause Remedy
To Next Page
Loading...
