BenQ HT5550 - Menu System Overview and PICTURE Menu

26 Menu operation
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the
projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
Main menu Submenu Options
PICTURE
Picture Mode
Bright/Vivid TV/Cinema/D. Cinema/User/ISF Night/ISF
Day/Silence/3D/HDR10/HLG
User Mode
Management
Load Settings From
Rename User Mode
Brightness 0–100
Contrast 0–100
Color 0–100
Tint 0–100
Sharpness 0–15
Advanced
Gamma Selection 1.8/2.0/2.1/2.2/2.3/2.4/2.5/2.6/BenQ
HDR Brightness -2 – +2
Color Temperature
Preset/Red Gain/Green Gain/Blue
Gain/Red Offset/Green Offset/Blue
Offset
Color Management
Primary
Color/Hue/Saturation/Gain
CinemaMaster
Color Enhancer/Flesh Tone/Pixel
Enhancer 4K/Motion Enhancer 4K
Noise Reduction Low/Middle/High/Off
Dynamic Iris On/Off
Brilliant Color On/Off
Wide Color Gamut On/Off
Light Mode Normal/Economic/SmartEco
Reset Current
Picture Mode
Reset/Cancel
DISPLAY
Overscan
Adjustment
0–3
3D
3D Mode
Auto/Frame Packing/
Top-Bottom/Side-by-Side/Off
3D Sync Invert
HDR Auto/Off
Silence On/Off