BenQ Joybee GP2 - Page 13

Introduction
13
11. Right key
When the On-Screen Display (OSD) menu
is on:
- Navigate right to select the desired menu
items.
- Make adjustments. (e.g. brightness,
contrast...)
When the On-Screen Display (OSD) menu
is off: (Only applied to SD card, internal
memory and USB Drive)
- Play next video and audio file.
- Press and hold to fast forward video and
audio file.
12. OK
Confirms a selected function when a menu
is displayed.
Plays or pauses a video, music, photo
slideshow. (Only applied to SD card,
internal memory and USB Drive)
13. Back
Returns to upper level of OSD.
Closes pop-up setting menu of OSD.
Leave current application of OSD.
14. Down/Voume down key
When the On-Screen Display (OSD) menu
is on:
- Navigate to down to select the desired
menu items.
- Make adjustments. (e.g. manual
keystone...)
When the On-Screen Display (OSD) menu
is off: (Only applied to SD card, internal
memory and USB Drive)
- Reduces the volume level.
iPhone/iPod
Remote control over iPhone or iPod is not
only workable in power-on mode but also
standby mode in which GP2 acts as a docking
speaker.
1. Volume up/down keys
Adjust iPhone or iPod volume.
2. Up key
Scroll up to select a video or music
within a file list of 'iPod' menu.
3. Previous/Next keys
Skip to the beginning of the current/next
video or music.
Press and hold to rewind/fast-forward
the current video or music.
4. Menu/Back key
Bring up iPod menu
Switch between submenu in 'iPod' menu.
Go to previous menu within 'iPod' menu.
5. Down key
Scroll down to select a video or music
within a file list of iPod menu.
6. Play/pause key
Play/pause music or video within a file list
of 'iPod' menu in iPhone or iPod.
If the iPhone or iPod is at the Main Menu,
pressing Play/Pause will cause the iPhone or
iPod to start playing all of it's music.
7. OK key
Select a menu or feature in iPod menu.
Confirm to play a music or video within a
file list of 'Pod' menu in iPhone or iPod.