Introduction
12
Remote control
1. POWER
Toggles the projector between standby
mode and on. See "Starting up the
projector" on page 33 and "Shutting down
the projector" on page 67 for details.
2. Keystone
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 35 for details.
3. Blank
Toggles Blank on and off. See "Hiding the
image" on page 35 for details.
4. Left key
When the On-Screen Display (OSD)
menu is on:
- Navigate left to select the desired menu
items.
- Make adjustments. (e.g. brightness,
contrast...)
When the On-Screen Display (OSD)
menu is off: (Only applied to SD card,
internal memory and USB Drive)
- Play previous video and audio file.
- Press and hold to rewind video and audio file.
5. Auto
Automatically determines the best
picture timings for the displayed
computer image. See "Auto-adjusting the
image" on page 34 for details.
6. Menu
Turns on the Pop-up setting menu.
7. Mute/unmute
Turns on/off volume during video or
music playback. (Only applied to SD card,
USB Drive, internal memory, iPhone and
iPod)
8. Mode
Selects an available picture setup mode.
See "Selecting a picture mode" on page
39 for details.
9. Up/Volume up key
When the On-Screen Display (OSD)
menu is on:
- Navigate up to select the desired menu
items.
- Make adjustments. (e.g. manual
keystone...)
When the On-Screen Display (OSD)
menu is off: (Only applied to SD card,
internal memory and USB Drive)
- Magnifies the volume level.
10. Home
Directly returns to home screen from
lower level of OSD.
Exits application/pop-up message and
back to home screen directly.
1
2
3
5
3
7
10
5
2
12
4
8
6
9
13
4
1
11
14
1
3
6
7
I
I
To Next Page
Loading...
