Menu operations 33
Menu operations
One touch menu operation
Drag the OSD menu up from the bottom-center of the screen, as shown below, to
enter the OSD menu.
Settings menu
Input settings
Press on the remote control, Menu on the front panel, or drag from the bottom
middle to the center of the screen to enter the OSD menu.
• Press ///on the remote control and press OK to confirm, or directly click a
desired input source.
• Press on the remote control or click a blank area outside the menu to exit the
menu.
• You can enable the Eye-Care function on the OSD menu. Eye-Care switches the
display low blue light mode and activates the flicker free function.
• Use the brightness bar to adjust the brightness for the display.
To Next Page
Loading...
