BenQ RM5502K - Page 39

Menu operations 35
Display settings
Leave the android system and connect to other input sources like VGA, HDMI, OPS.
Then go to Display.
• Press /// on the remote control and press OK to confirm or directly click an
item.
• Press on the remote control or click a blank area outside the menu to exit the
menu.
• Press/on the remote control and press OK to adjust image.
• The display automatically enters energy saving mode when no one is detected within
the sensor’s range.
• The display automatically turns off when no one is detected within the sensor’s range
for a long period of time.
Adjust settings (VGA-only)
Use the H Position, V Position, Clock, and Phase functions to manually adjust the
image.
Menu Description
Aspect ratio Press/on the remote control or click an aspect ratio.
Options are 16:9 or PTP. You can also select Auto to adjust the
image.
Menu Description
H Position Press to move the screen to the left or right.
V Position Press OK on the remote control or click the switch to lock or
unlock the remote control IR sensor on the front panel of the
display.