BenQ W703D - Remote Control Effective Range

Introduction 13
English
Remote control effective range
Infra-Red (IR) remote control sensor is located on the
front and the top of the projector. The remote control
must be held at an angle within 30 degrees
perpendicular to the projector's IR remote control
sensor to function correctly. The distance between the
remote control and the sensor should not exceed 7
meters (~ 23 feet).
Make sure that there are no obstacles between the
r
emo
te control and the IR sensor on the projector that
might obstruct the infra-red beam.
A
p
p
r
o
x.
±
1
5
°
A
p
p
r
o
x.
±
1
5
°
BenQ W703D.book Page 13 Friday, November 25, 2011 9:49 AM