BenQ W703D - Page 59

Maintenance 59
English
Resetting the lamp timer
11. After the startup logo, open the On-Screen
Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced > Lamp Settings
menu. Press MODE/ENTER. The Lamp
Settings page displays. Press to
highlight Reset lam
p
timer an
d press
MODE/ENTER. A warning message
displays asking if you want to reset the lamp timer. Highlight Reset and press MODE/
ENTER. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.
Reset Lamp Timer?
Reset
Cancel
Notice
BenQ W703D.book Page 59 Friday, November 25, 2011 9:49 AM