58 Web management
Firmware Upgrade
The Firmware Upgrade sub-menu allows you to check for and execute firmware upgrades for
both the Host and Button.
• Checking for Upgrades (for Host)
Before checking for a new firmware upgrade for your Host, ensure that the Host is connected via the
WAN port to a router with access to the Internet, then click the New Firmware Check button to
check for a firmware upgrade. To have the Host periodically check for firmware upgrades check the
Periodical Check box.
If a new firmware upgrade is available the new firmware version will be listed in the New Firmware
Version field.
Periodic checks for upgrades can only occur when the Host is connected via the WAN port to a router with
access to the Internet.
To Next Page
Loading...
