Bentel Security KYO 4 M User Manual

31
®®
Section 4 - Installing the Control Panel
Table 4.1 - Description of the Terminals
PCB Terminals
Description
Voltage
(V)
Current
Max. (A)
K8G - K8GW - K32G K4 - K8 - K8W - K32
1-2-3-4
[+][C][R][-]
Terminals for the BPI Device connections
(Keypads, Readers, Expander, etc.)
13.8 (*)
5 [AS] 17 [AS]
Balanced 10K Tamper Line ––
6-9-12-15-18-21-24-
27-30-37
[M
MM
M]
4-6-8-11-14-17
[M
MM
M]
Negative Terminal 0 –
7-10-13-16-19-22-25-28
[+F]
22 [+B]
Positive Terminal — power supply to the
Detectors
13.8 (*)
8-11-14-17-20-23-26-29
[L1] ... [L8]
7-9-10-12-13-15-16-18
[L1] ... [L8]
Programmable A larm Lines
(KYO4 manages Lines L1 ... L4)
––
31-32-33
[NC][COM][NO]
19-20-21
[NC][NO][COM]
Free Voltage Changeover Alarm Relay:
during Standby  COM Terminal
connected to NC (NO floating)
during Alarm

COM Terminal
connected to NO (NC floating)
––
34 [+N] –
Positive is present on this terminal
during Standby
this Terminal is Open during Alarm
13.8 (*)
35 [+A] –
Positive is present on this terminal
during Alarm
this Terminal is Open during Standby
13.8 (*)
36
[+B]
22
[+B]
Auxiliary Power Supply for peripherals 13.8 (*)
–
23-24-25
[O1][O2][O3]
150 mA Auxiliary Open-Collector
Outputs — Programmable
–
0.15
(*)
38-39-40-41-42
[O1][O2][O3]
[O4][O5]
–
500 mA Auxiliary Open-Collector
Outputs — Programmable
0.5
(*)
43-44-45-46
[GRN][YEL]
[BLK][RED]
26-27-28-29
[GRN][YEL]
[BLK][RED]
Key Bus Terminals (if present):
RED  Positive BLK  Negative
13.8 (*)
47-48
[LE]
32-33
[LE]
External Telephone Line Terminals ––
49-50
[LI]
34-35
[LI]
Terminal for line-sharing devices (Fax,
Modem, Telephone, etc.) — connected to
the same Telephone line as the Panel
––
51
[-
--
-]
36
[-
--
-]
Terminal for the Earth connection ––
– 30-31 [AC]
Terminals for the Transformer
secondary connection
––
(*) - the total current draw of these terminals must not exceed:
(*) -
0.6 A
- for K4, K8, K8W and K32 with Transformers
(*) - 1 A - for K8G-SW1, K8GW-SW1 and K32G-SW1 with the BAQ15T12 Switching Power Supply
(*) - 2.3 A - for K8G-SW2, K8GW-SW2 and K32G-SW2 with the BAQ35T12 witching Power Supply
(*) - (the Battery Charge value must be subtracted from these values)

Bentel Security KYO 4 M Specifications

General

Brand	Bentel Security
Model	KYO 4 M
Category	Control Unit
Language	English