3 Bentone
General
Table of contents
1. General Information __________________________________ 4
2. Technical data _______________________________________ 7
2.1 Dimensions B 2 __________________________________ 7
2.2 Dimensions, flanges _______________________________ 7
2.3 Burner installation _________________________________ 7
2.5 Working field B 2 KS,KSV __________________________ 8
2.4 Setting of brake plate and air flow ___________________ 8
2.6 Working field B 2 KA,KAV __________________________ 9
2.7 Setting of brake plate and air flow ___________________ 9
2.8 Recommended nozzles and pressures ______________ 10
2.9 Nozzle table, 7-15 bar ____________________________ 10
2.10 Description ______________________________________ 11
3. General instructions _________________________________ 13
3.1 General instructions ______________________________ 13
3.2 Delivery inspection _______________________________ 14
3.3 Preparing for installation ___________________________ 14
3.4 Oil distribution ___________________________________ 14
3.5 Electrical connection ______________________________ 14
3.6 Burner installation ________________________________ 15
4. Basic settings ______________________________________ 16
4.1 Example of basic settings _________________________ 16
5. Burner servicing ____________________________________ 19
5.1 Servicing _______________________________________ 19
5.2 Hanging the burner _______________________________ 19
5.3 Servicing the combustion device ___________________ 19
5.4 Replacing the oil pump ___________________________ 21
5.5 Replacing the fan motor and fan wheel ______________ 22
5.6 Replacing the entire electrical package ______________ 23
5.7 Replacing individual electrical package components ___ 23
6. Instructions Pump __________________________________ 24
6.1 SUNTEC AS ____________________________________ 24
7. Instructions Pump __________________________________ 30
7.1 DANFOSS BFP41 ________________________________ 30
8. Preheater ___________________________________________ 34
9. Oil burner control ___________________________________ 35
9.1 Wiring diagram _________________________________ 35
10. Fault Location ____________________________________ 38
10.1 Burner will not start _______________________________ 38
10.2 Burner will not start after normal use ________________ 38
10.3 Delayed ignition __________________________________ 39
10.4 Noise in pump ___________________________________ 39
10.5 Pump pressure __________________________________ 39
11. Log of flue gas analysis ____________________________ 40
12. Oil burners maintenance instructions _______________ 41
To Next Page
Loading...
