Bentone B40 MF - Dimensions, Flange; Recommended Nozzle and Pressure

10
Bentone B40 MF/B45-2 MF
General
14
ø134
220
ø114
200
37
34
14
B40 MF B45-2 MF
1.5 Dimensions, flange
1.6 Recommended nozzle and pressure
Nozzle: 45° Solid/semi-solid
60° Solid/semi-solid
80° Solid/semi-solid
Pump pressure 28 bar (24-28 bar)
1)
24 bar (20-28 bar)
2)
!
The burner pump is factory set at 24 bar and
test operated using Roadway 80.
Because of the various boiler types with varying furnace geometries and
furnace loads, it is impossible to commit to a certain scattering angle or a
specific distribution pattern.
It should be noted that the scattering angle and distribution pattern changes
with pump pressure.
1)
high viscosity oils
2)
low viscosity oils