Irrigation IOM
Sensors
| 5 |
7.3 MUT1222 39
7.3.1 Dimensions and main features 39
7.3. 2 Calculation of the insertion depth 40
7.3.3 Installation of the sensor 41
7.3.3.1 Preparation of the pipe 41
7.3.3.2 Assembly of the flowmeter 41
7.3.4 Installation on non-metallic pipes using a saddle bracket 42
7.3.5 Flowmeter grounding 42
7.4 MUT2660 43
7.4.1 Dimensions and main features 43
7.4. 2 Calculation of the insertion depth 44
7.4. 3 Installation of the sensor 45
7.4. 3.1 Preparation of the pipe 45
7.4. 3.2 Installation of the flowmeter 45
7.4.4 Flowmeter grounding 46
7.5 MUT2770 47
7.5.1 Dimensions and main features 47
7.5. 2 Calculation of the insertion depth 48
7.5. 3 Installation of the sensor 49
7.5. 3.1 Preparation of the pipe 49
7.5. 3.2 Installation of the flowmeter 49
7.5.4 Flowmeter grounding 50
8 MAINTENANCE 50
8.1 BOLTS TIGHTENING 50
8.2 GROUNDING CHECK 50
8.3 CLEANING OF EBONITE COATINGS 50
9 TROUBLESHOOTING 50
10 CERTIFICATIONS AND TECHNICAL FEATURES 50
11 SENDING THE FLOWMETER TO THE MANUFACTURER 51
12 PRODUCT DISPOSAL 51
To Next Page
Loading...