Sewing preparations
13
Sewing preparations
Bobbin Case
To remove the bobbin case
⦁
raise needle
⦁
power switch to «0» (off)
⦁
open the bobbin cover
⦁
grasp the latch of the bobbin case
⦁
remove bobbin case
Bobbin thread cutter
⦁
insert the bobbin case
⦁
take the thread over cutter A and cut it
⦁
close the bobbin cover
To insert the bobbin case
⦁
hold the bobbin case latch
⦁
the finger on the case should point upwards
⦁
insert the case so that it clicks into place
The bobbin thread does not have to be brought up as the loose end
is just the right length to start sewing.
A
To Next Page
Loading...
