Bernina 325 - Manual Buttonhole (All Types)

Buttonholes
Buttonhole
40
Buttonholes
Buttonhole sole no. 3
Preparation
⦁
select the desired buttonhole
⦁
display shows:
⦁
the number of the selected buttonhole
⦁
Buttonhole foot no. 3
⦁
the buttonhole symbol (the first step blinks on the display)
⦁
insert the lower thread in the finger of the bobbin case
Manual buttonhole (all types)
Sewing buttonholes manually is ideal if you only need to sew one; also for
repairing existing buttonholes.
The number of steps depends on the type of buttonhole.
Manual buttonholes cannot be saved.
Sewing a manual standard buttonhole
1. sew the bead up to the end of the length marking
⦁
stop the sewing computer
⦁
press the Quick reverse button
2. sew reverse straight-stitch, stop the sewing computer at the first stitch of
the bead (buttonhole begin)
⦁
press the Quick reverse button
3. sew the top bartack and the second bead, stop the sewing computer
⦁
press the Quick reverse button
4. sew the bottom bartack and securing stitches
4
3
1
2
Manual keyhole buttonhole
1. sew straight-stitch forwards, stop the sewing computer
⦁
press the Quick reverse button
2. sew the eye and the first bead in reverse, stop the sewing computer at the
first stitch of the bead (buttonhole begin)
⦁
press the Quick reverse button
3. sew straight-stitch forwards and stop the sewing computer at the keyhole
⦁
press the Quick reverse button
4. sew the second bead in reverse, stop the sewing computer at the first stitch
of the bead (buttonhole begin)
⦁
press the Quick reverse button
5. sew bartack and securing stitches
345
2
1
Sew both beads at the same speed.