Buttonholes
38
Buttonholes
Automatic standard buttonhole with auto-length
Buttonhole foot with slide no. 3A
Automatic standard buttonhole
The lens on Buttonhole foot with slide no. 3A automatically registers the length
of the buttonhole for exact duplication.
►
the active step blinks on the screen
5432
1
Programming the standard buttonhole
1. sew the first bead forwards, stop the sewing computer
⦁
press the Quick reverse button
►
«auto» and the presser foot no. 3A appears on the display = buttonhole
length is programmed
the sewing computer sews the following automatically:
2. straight stitches in reverse
3. the first bartack
4. the second bead forwards
5. the second bartack and securing stitches
⦁
the sewing computer stops and returns automatically to buttonhole
begin
Auto-buttonhole
⦁
all subsequent buttonholes will be sewn to exactly the same length (no
need to press the Quick reverse button)
⦁
clear the program by pressing the «clr» button
⦁
Saving programmed buttonholes in long-term memory (see p. 41)
Sewing speed
⦁
sew at moderate speed for best results
⦁
sew all buttonholes at the same speed for a consistent bead
density
WARNING!
The slide foot must lie perfectly flat on the fabric! If the slide
foot rests on a seam allowance, the length cannot be measured
accurately.
When any automatic buttonhole is selected, presser foot no. 3 is
indicated on the screen.
To Next Page
Loading...
