Sewing preparations
15
Sewing preparations
Threading the First Thread
⦁
place thread spool on horizontal spool pin and thread
⦁
guide the thread to the front in the slit and past the tension disc A on the
right side
⦁
thread sewing computer as usual and thread the right needle
Threading the Second Thread
⦁
place thread spool on the vertical spool pin and thread
⦁
guide the thread to the front in the slit and past the tension disc A on the
left side
⦁
thread the left needle
⦁
threads must not be twisted together
⦁
two thread spools and one full bobbin are needed
⦁
place one thread spool on horizontal spool pin
⦁
place second thread spool and the bobbin, separated by a spool disc, on
vertical spool pin (both spools have to turn in the same direction)
⦁
thread as usual by guiding two threads on the left side of the tension disc A
and one thread on the right side of the disc
A
A
Threading the Triple Needle
Threading the Double Needle
To Next Page