MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/10
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
STITCH LENGTH ADJUSTMENT
• Owner’s manual pg.___
• Fold fabric in half to 3” x 6”.
• Using a fabric marker, divide the fabric into four equal sections along the folded edge.
• Thread the serger for a four thread overlock stitch.
• Fine tune the tensions for a balanced overlock stitch (3-5).
• Set the cutting width and the differential as needed.
• Adjust the stitch length to 4mm.
• Serge to the first mark along the folded edge, trimming the fold slightly.
• Adjust the stitch length to 3mm and serge to the second mark.
• Adjust the stitch length to 2mm and serge to the third mark.
• Adjust the stitch length to 1mm and serge to the end.
• Mark the stitch length settings on the fabric sample.
• Trim and mount the sample.
Fabric: Firm fabric, 6” x 6”
Needle: 80/12 Universal
Thread: 4 cones of serger thread
Presser Foot: Standard
4mm 3mm 2mm 1mm
To Next Page
Loading...
