Bernina 700D - BLINDSTITCH FOOT Blind Hem

MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/50
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
BLINDSTITCH FOOT
Blind Hem
Fabric: Cotton Jersey, 5” x 6”
Needle: 80/12 Universal
Thread: 3 cones of serger thread
Presser Foot: Blindstitch Foot (optional accessory)
• Owner’s manual pg.___
• Set the serger for a narrow 3-thread overlock stitch (right needle).
• Set needle thread tension levers directed in the instruction leaflet for the Blindstitch Foot.
• Adjust the stitch length to 4mm.
• Attach the Blindstitch Foot.
• Following the instructions in the leaflet for the Blindstitch Foot, fold the fabric for a 1½” blind
hem and place the fabric under the foot.
• Adjust the fabric guide so that the needle just catches the fold in the stitching.
• Serge the hem, keeping the fold of the fabric against the guide.
• Press the hem.
• Trim and mount the sample.