Bernina 700D - BLINDSTITCH FOOT Hand-picked or Drapery Blind Hem

MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/51
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
Fabric: Medium weight fabric, 5” x 6”
Needle: 80/12 Universal
Thread: 3 cones of serger thread
Presser Foot: Blindstitch Foot (optional accessory)
BLINDSTITCH FOOT
Hand-picked or Drapery Blind Hem
• Owner’s manual pg.___
• Set the serger for a narrow 3-thread overlock stitch (right needle).
• Set needle thread tension levers as directed in the instruction leaflet for the Blindstitch Foot.
• Adjust the stitch length to 3.5mm.
• Attach the Blindstitch Foot.
• Turn up a double folded 1” hem. Fold the remaining fabric under so that no fabric extends
beyond the upper edge of the hem.
• Place the fabric under the presser foot. The fold of the fabric should rest against the guide.
• Adjust the fabric guide so that the needle just catches the fold in the stitching.
• Serge the hem, keeping the fold of the fabric against the guide.
• Press the hem.
• Trim and mount the sample.