Bernina 700D - Page 13

MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/13
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
DIFFERENTIAL FEED
Fabrics That Pucker
Fabric: Batiste, 3” x 6”
Needle: 80/12 Universal
Thread: 4 cones of serger thread
Presser Foot: Standard
N
0.7
• Owner’s manual pg.___
• Thread the serger for a four thread overlock stitch.
• Fine tune the tensions for a balanced overlock stitch (3-5).
• Adjust the stitch length to 2.5mm.
• With differential set at N, serge on one 6” edge. If fabric is lightweight enough you will have
a puckered edge.
• Adjust the differential to 0.7.
• Serge along the other edge, trimming slightly. With a low differential setting, the puckered
edge should be eliminated.
• Mark the differential settings on the fabric sample.