MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/20
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
4 THREAD OVERLOCK SEAM
Fabric: Medium weight, 5” x 6”
Needle: 80/12 Universal
Thread: 4 cones of serger thread
Presser Foot: Standard
• Owner’s manual pg.___
• Thread the serger for a 4-thread overlock stitch.
• Set all thread tension levers between 3-5 (normal).
• Locate the seam guide markings on the knife guard. Distances are measured from the right needle.
• When using the left needle, distance is increased by
1
/8”.
• Fold the fabric in half to 2½” x 6”.
• Align the fold of the fabric with the ½” mark on the knife guard (the left needle is being used). Serge
the seam, cutting off exactly
3
/8”.
• Trim and mount the sample.
To Next Page
Loading...
