MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/24
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
ATTACHING RIBBING
Fabric: Sweatshirt fleece, 4” x 6”
Ribbing, 6” (width) x 2½” (length)
Needle: 11/75 Stretch or Ballpoint
Thread: 2 cones of serger thread (needles)
2 cones of Woolly Nylon (loopers)
Presser Foot: Standard
• Owner’s manual pg.___
• Thread the serger for a 4-thread overlock stitch using Woolly Nylon in both loopers.
• Set all thread tension levers between 3-5 (normal).
• Cut a mock neckline on the corner of the fleece (quarter circle).
• Fold the ribbing in half (wrong sides together) to 1¾” x 6”.
• Matching raw edges, place the ribbing to the neckline on the right side of the fleece.
• Serge the ribbing to the fleece, stretching the ribbing to meet the fleece neckline.
• Trim and mount the sample.
To Next Page
Loading...
