Bernina 700D - Wide Overlock Stitch; Narrow Overlock Stitch; Flatlocking; Rolled Edge

MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/39
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
Wide Overlock Stitch - Owner's manual pg._____
• Left Needle only
• Used for: Seaming stretchy knit fabrics, finishing woven edges, and serging outside corners.
Narrow Overlock Stitch - Owner's manual pg._____
• Right needle only
• Used for: Seaming fine fabrics, finishing woven edges, inside corners, turning tubes.
• Rolled hem lever disengages the stitch finger.
• Some minor tension adjustments may need to be made to the loopers
• Used for: Seaming batiste and other fine fabrics, finishing the edge of fine fabrics.
Flatlocking - Owner's manual pg._____
• Right or left needle
• Right seam guide (optional accessory that requires Attachment Base) - adjust for fabric guiding.
Rolled Edge - Owner's manual pg._____
• Right needle only
• The upper looper thread is visible.
• Woolly Nylon in the upper looper “fills in” like a sewing machine satin stitch.
• The rolled hem lever disengages the stitch finger.
Optional Presser Feet
• Blindstitch Foot – Owner's leaflet for Blindstitch Foot
- Strong hem for children’s garments
- Home decor
- Hemming woven garments
- Heirloom Serging
Decorative Tucks
Seaming Lace to Lace
Seaming Lace to Fabric
• Cording Foot - Owner's leaflet for Cording Foot
- Wire for edging fabrics
- Gimp cord for gathering heavy fabrics
• Attachment Base
- For adding 2500 and 1100 attachments
Gathering Attachment
Right Seam Guide
Multi-Purpose Foot Guide
• Right Seam Guide
- Accurate seaming
Attach the right seam guide when working with standard patterns with
5
/
8
” seam allowances
Adjust the guide from the left needle.
Use a 6” ruler/gauge to measure.
SECTION C
3-Thread Techniques