Bernina 700D - THREE THREAD OVERLOCK (3 mm-5 mm - Right Needle) Seam

MASTERING YOUR BERNINA
®
1/04/02 700D/800DL/44
BERNINA
®
700D/800DL
MASTERING
YOUR
BERNINA
®
THREE THREAD OVERLOCK
(3mm-5mm - Right Needle) Seam
Fabric: Lightweight fabric, 5” x 6”
Needle: 80/12 Universal
Thread: 3 cones of serger thread
Presser Foot: Standard
• Using the small screwdriver and brush/needle insertion tool, remove the left needle.
• Snug the needle set screw after removing the needle.
• Following the diagrams in the Owner’s manual, thread the serger for a narrow 3-thread
overlock stitch.
• Set all thread tension levers between 3-5 (normal).
• Adjust cutting width to 2mm (normal).
• Adjust stitch length to 2.5mm (normal).
• Fold the fabric in half to 2½” x 6”.
• Serge along the folded edge of the fabric.
• Trim and mount the sample.