My BERNINA overlocker
22
Default values
The default values of the machine are chosen so that the settings are suitable for most typical applications.
The default values are marked on the machine with a gray dot.
The actual values may differ from the stitch chart depending on the fabric, thread and stitch and may need
to be adjusted to the result of the sewing sample.
2.5 Overview - standard accessories
Included accessories
The machine is ready for operation with the supplied accessories. Special sewing applications sometimes
require optional accessories.
Visit www.bernina.comfor more accessories information.
Illustration Name Purpose
Dust cover To protect the machine against dust when it is not
in use and to store the accessories such as the
slide-on table, the instruction manual, the Free
Hand System, the foot control and the power
cable.
Power cable To connect the machine with the power supply
system.
Foot control To start and stop the machine.
To control the sewing speed.
To start the air threading.
Cut-offs Bin To collect resulting scraps.
Knife cover insert To protect the fingers and to deflect the fabric cut-
offs during the sewing process.
To Next Page
