Setting up the machine
52
3.7 Handwheel
By turning the handwheel counterclockwise, several activities can be performed.
• Slow, precise placement of the needle.
• Move loopers.
• Move knife.
• Mechanically couple the air threader.
3.8 Sewing Assistance
Using the thread cutter
The thread cutter is used to cut the threads and the thread chain.
> Pull the threads/thread chain into the thread cutter and downwards.
– The threads/thread chains are held after cutting and are ready for sewing.
Attaching/removing the knee lifter
By lifting the presser foot with the knee lifter, the sewing project can be placed with both hands.
To Next Page
