Machine settings
80
7.7 Adjusting the differential feed
The differential feed prevents unwanted seam puckering or seam waves in knitted or stretchy fabrics as well
as shifting of fabric layers. The rear feed dog always maintains the same speed, while the front feed dog can
be adjusted. The two feed dogs can be geared to each other during the sewing process so that the fabric is
fed as desired and no waves or unwanted puckering occur.
To enable a «blind operation», the setting range is displayed larger when the machine is running.
> Set differential feed proportion of the front feed dog via the differential feed setting.
Setting for the
front feed dog
Fabric Result
2 Fine, soft fabric Ruffling, puckering, gathering
1,5 Jersey, sweatshirt, knits Slight ruffling, preventing seam waving
1 Wowen knit and medium weight dense
fabric.
Default value
0,7 Fine nylon tricots, densely woven fabric,
lining, satin
Stretching, preventing seam puckering
The setting describes the ratio of momvement of front feed dog relative to the rear feed dog.
Default value 1
To Next Page
