Installation
Precellys
®
24
Page 11/35
4 Installation
WARNING:
Do not connect the unit to the main supply before the installation is over.
Do not turn the unit upside down: the PRECELLYS
®
24 must always rest on its 4 feet for fear
of damaging internal components or breaking plastic casing.
4.1 Unpacking
1) Check the content of the box. The box must contain the following items:
1 user manual (French / English)
1 PRECELLYS
®
24 (with 1 indented plate and 1 toric joint)
1 AC power cord (European plug*)
1 extra toric joint
1 spare fuse
1 EC Declaration of Conformity
1 QC report
Should one of these items be missing, please contact immediately your local distributor’s office.
* A plug adapter or a compatible power cord (not included) is required for the UK and other
countries such as the USA, Canada, Japan, etc.
2) Remove the PRECELLYS
®
24 from the box and place it on a clean, horizontal and stable surface
(weight = 29.8 kg).
WARNING :
To remove the unit from the box, do not lift it by holding the cover. It must be removed by
holding the notches located on both sides of the unit. For more convenience, notches are also
present in the protective foam.
3) Unpack the PRECELLYS
®
24 with care and inspect it carefully. Report any damage to the carrier
immediately.
4) Save the packaging material, in case a return is necessary.
To Next Page
Loading...
Need help?
General
