Adjusting Parameters
Precellys
®
24
Page 19/35
6 Adjusting Parameters
6.1 Accessing the Parameter Adjustment Menu
From the sub-menu, the user can adjust the settings of program 1 and program 2, by moving the
cursor to the line 1 with the “Up” button, then pressing the “Valid” button.
6.2 Parameters Adjustment Menu
6.2.1 Adjusting the Speed
When the adjustment menu is selected, the following message is displayed and the speed value
flashes:
6500
6500-2x45-020
SPEED (rpm)
Red light is off / green light is on
The user can change the speed value using the “Up” and “Down” buttons. The speed adjustment
ranges from 5,000 rpm to 6,800 rpm in increments of 100 rpm.
When the desired value is reached, the user can select it by pressing the “Valid” button or return to
the previous menu by pressing the “Cancel” button.
To Next Page
Loading...