Need help?Do you have a question about the Besam RD3 and is the answer not in the manual?
Instructions for use must be followed to avoid injury, damage, and malfunction.
Contact authorized Besam service center for maintenance and inspection.
Steps for starting the door, including automatic and continuous rotation modes.
How to reset the door in case of an error.
Lists standard safety features like safety switches and emergency stop.
Explains how safety switches on drum edges stop rotation when compressed.
Describes how force sensitive leaves detect obstacles and attempt restart.
How to use the emergency stop button to stop and reset the door.
Details on logging into, logging out of, and changing the access code for the PCD.
Steps to change the door's operating mode using the PCD.
Information on programming and managing real-time operation schedules.
How to activate real-time operation using the PCD.
How to deactivate real-time operation and return to manual mode.
Details on safety switches mounted on door leaves.
Basic troubleshooting steps for common issues like the door not starting.
Checks to perform if the door fails to start upon power-up.
A table listing error/status codes, their cause, and remedies.
To Next Page
General