Beta EVO 2T Instruction Manual

52
MAINTENANCE AND CHECKS
GB
3
GEARBOX OILGEARBOX OIL
GEARBOX OILGEARBOX OIL
GEARBOX OIL
CheckCheck
CheckCheck
Check
Hold the vehicle vertical to the ground.
When engine is cold check the oil level by
means of porthole
AA
AA
A. The oil level must
be always visible from the porthole.
In contrary case restore the oil level through
cap
BB
BB
B.
Oil changeOil change
Oil changeOil change
Oil change
The engine must be hot when changing
oil:
•Place a container under the engine
•Unscrew the filler cap and oiI drain plug
CC
CC
C
•Empty the crankcase completely
•Close drain plug
CC
CC
C
•Put in the right oil quantity (table on page
45)
•Close the filler cap.
Note:Note:
Note:Note:
Note:
Change the gearbox oil after the first 5
hours of operation. For all subsequent
changes, follow the instructions given on
the chart on pag. 66, using the Iubricants
recommended on pag. 49.

Beta EVO 2T Specifications

General

Displacement	249 cc
Cooling System	Liquid cooled
Transmission	6-speed
Bore x Stroke	66.4 mm x 72 mm
Clutch	Wet multi-disc
Dry Weight	67 kg
Engine Type	2-stroke single
Front Suspension	Telescopic fork
Rear Suspension	Monoshock
Front Brake	Single disc
Rear Brake	Single disc
Fuel Capacity	2.5 liters
Frame	Aluminum