Beta EVO 2T Instruction Manual

62
MAINTENANCE AND CHECKS
GB
3
LIQUID COOLANTLIQUID COOLANT
LIQUID COOLANTLIQUID COOLANT
LIQUID COOLANT
The level check must be performed with
the engine cold, as follows:
•Unscrew cap
AA
AA
A and check the level of
the liquid
•lf the level is not visible in proximity of the
bottom of pipe proceed to add liquid
Circuit capacity is indicated in the table
on pag. 45. Use the liquids recommended
on the table on pag. 49.
WARNING:WARNING:
WARNING:WARNING:
WARNING:
To avoid burns, never unscrew the
radiator filler cap when the engine is hot.
SILENCERSILENCER
SILENCERSILENCER
SILENCER
If an increase in exhaust noise is noted,
check the silencer.
Proceed as follows:
•Unscrew the 3 screws
BB
BB
B
•Take off end piece
CC
CC
C
•Extract the fiber wool and substitute
with a new other (available as spare-
part)
•To reassemble, proceed in the reverse
order.

Beta EVO 2T Specifications

General

Displacement	249 cc
Cooling System	Liquid cooled
Transmission	6-speed
Bore x Stroke	66.4 mm x 72 mm
Clutch	Wet multi-disc
Dry Weight	67 kg
Engine Type	2-stroke single
Front Suspension	Telescopic fork
Rear Suspension	Monoshock
Front Brake	Single disc
Rear Brake	Single disc
Fuel Capacity	2.5 liters
Frame	Aluminum