Beta EVO 2T Instruction Manual

71
GB
4
ADJUSTEMENTS
ADJUSTEMENT OF FRONTADJUSTEMENT OF FRONT
ADJUSTEMENT OF FRONTADJUSTEMENT OF FRONT
ADJUSTEMENT OF FRONT
SUSPENSIONSUSPENSION
SUSPENSIONSUSPENSION
SUSPENSION
FF
FF
F
orkork
orkork
ork
•For a more active “quicker” suspension
setting, totally unscrew regulation knob
B B
B B
B compared to the std. position
• For a more controlled “slower”
suspension setting, preload spring for
about 4-5 turns using the adjusting screw
A A
A A
A and turning the knob
B B
B B
B by 15 clicks
from the fully opened position, which is
in the middle of the adjustement.
•Rider weight. According to the rider weight,
use the following settings:
THGIEWREDIRTHGIEWREDIR
THGIEWREDIR
THGIEWREDIRTHGIEWREDIR
)gk(
GNIRPSGNIRPS
GNIRPS
GNIRPSGNIRPS
DAOLERP
08>thgiew
snrut01+
mm801
08<thgiew<57
snrut5+
mm011
07<thgiew
0
mm211
In the event of any malfunction, contactIn the event of any malfunction, contact
In the event of any malfunction, contactIn the event of any malfunction, contact
In the event of any malfunction, contact
our authorised customer serviceour authorised customer service
our authorised customer serviceour authorised customer service
our authorised customer service
network.network.
network.network.
network.

Beta EVO 2T Specifications

General

Displacement	249 cc
Cooling System	Liquid cooled
Transmission	6-speed
Bore x Stroke	66.4 mm x 72 mm
Clutch	Wet multi-disc
Dry Weight	67 kg
Engine Type	2-stroke single
Front Suspension	Telescopic fork
Rear Suspension	Monoshock
Front Brake	Single disc
Rear Brake	Single disc
Fuel Capacity	2.5 liters
Frame	Aluminum