Beta EVO 2T Instruction Manual

72
ADJUSTEMENTS
GB
4
ADJUSTMENT OF REAR SHOCKADJUSTMENT OF REAR SHOCK
ADJUSTMENT OF REAR SHOCKADJUSTMENT OF REAR SHOCK
ADJUSTMENT OF REAR SHOCK
ABSORBERABSORBER
ABSORBERABSORBER
ABSORBER
Adjustment of spring IoadAdjustment of spring Ioad
Adjustment of spring IoadAdjustment of spring Ioad
Adjustment of spring Ioad
•For a more active “quicker” suspension
setting, open compression regulation
knob
AA
AA
A
• For a more controlled “slower”
suspension setting, close compression
regulation
AA
AA
A
•Periodically clean the rebound rubber as follow:
lower/remove rebound rubber using a little screwdriver and blow with compressed
air in the spring spacer milling
•Always check the top and bottom bolts are tight.
In the event of any malfunction,In the event of any malfunction,
In the event of any malfunction,In the event of any malfunction,
In the event of any malfunction,
contact our authorised customercontact our authorised customer
contact our authorised customercontact our authorised customer
contact our authorised customer
service network.service network.
service network.service network.
service network.

Beta EVO 2T Specifications

General

Displacement	249 cc
Cooling System	Liquid cooled
Transmission	6-speed
Bore x Stroke	66.4 mm x 72 mm
Clutch	Wet multi-disc
Dry Weight	67 kg
Engine Type	2-stroke single
Front Suspension	Telescopic fork
Rear Suspension	Monoshock
Front Brake	Single disc
Rear Brake	Single disc
Fuel Capacity	2.5 liters
Frame	Aluminum