Beta RR 50 CC series - Page 21

1
GENERAL INFORMATION
21
GB
FRAME ................................................................. steel double cradle frame
WHEEL DIMENSION (ENDURO, ENDURO STANDARD)
front tyre .................................................................................80/90 - 21
rear tyre ................................................................................110/80 - 18
front rim ........................................................................................ 21x1,6
rear rim ......................................................................................18x1,85
WHEEL DIMENSION (FACTORY)
front tyre .................................................................................90/90 - 21
rear tyre ................................................................................120/80 - 18
front rim ........................................................................................ 21x1,6
rear rim ......................................................................................18x1,85
WHEEL DIMENSION (MOTARD, MOTARD STANDARD and TRACK)
front tyre ...............................................................................100/80 - 17
rear tyre ................................................................................130/70 - 17
front rim ...................................................................................... 17x2,50
rear rim ......................................................................................17x3,50
FILLING CAPACITY
fuel tank......................................................................................... 6 liters
including reserve of............................................................................1 liter
cooling circuit liquid
All the models ................................................................................ 500cc
FACTORY ..................................................................................... 850cc
crank case transmission oil ................................................10W/30 - 820cc
FRONT SUSPENSION
Hydraulic fork with Ø40 mm shaft (ENDURO - MOTARD - TRACK)
Hydraulic fork with Ø37 mm shaft (ENDURO STANDARD - MOTARD STANDARD)
Hydraulic fork with Ø41 mm shaft (FACTORY)
Level with tube at its limit ................................................................110 mm
Q = 390 ±5cc (Right and left stem)
- Viscosity at 40 °C Right stem ...................................................... 32,45
- Viscosity at 40 °C Left stem ........................................................ 46,00
front wheel travel (ENDURO) ..........................................................245 mm
front wheel travel
(ENDURO STANDARD - MOTARD - MOTARD STANDARD) ............... 210 mm
front wheel travel (FACTORY) ..........................................................250 mm
front wheel travel (TRACK) ..............................................................190 mm