- 23 -
Contents
Page
1. INTRODUCTION 24
2. MAIN CHARACTERISTICS 24
3. TECHNICAL SPECIFICATIONS 25
3.1 CONTROL PANEL DIMENSIONS 25
4. INSTALLATION SAFETY 25
5. PRELIMINARY OPERATIONS 25
6. INPUT AND OUTPUT FUNCTIONALITY AND CONNECTIONS 25
6.1 J2 POWER TERMINAL BLOCK 25
6.2 J3A/J3B POWER TERMINAL BLOCK 26
6.3 J4 OUTPUTS/ACCESSORIES TERMINAL BLOCK 26
6.4 J5A/J5B INPUTS TERMINAL BLOCK 27
6.5 J6 EXPANSION CONNECTOR 27
6.6 J8 PROGRAMMER CONNECTOR
FOR RECEIVER 27
7. DISPLAY 28
7.1 STATUS CODE 28
8. PROGRAMMING 29
8.1 BASIC FUNCTIONS 29
8.2 1ST LEVEL PROGRAMMING 30
8.3 2ND LEVEL PROGRAMMING 31
8.4 3RD LEVEL PROGRAMMING 32
8.5 4TH LEVEL PROGRAMMING 33
9. RADIO RECEIVER 34
9.1 RECEIVER TECHNICAL SPECIFICATIONS 34
9.2 RADIO CHANNEL FUNCTIONALITY 34
9.3 ANTENNA INSTALLATION 34
9.4 MANUAL PROGRAMMING 34
9.5 SELF-LEARNING MODE PROGRAMMING 34
TABLE A 35
10. CONNECTIONS FOR SIMULTANEOUS OPERATION 36
11. TROUBLESHOOTING GUIDE 36
12. WARNINGS 36
13. EXAMPLES OF CONTROLLING ENTRANCES 37
13.1 INSTALLATION A CONTROLLED ENTRANCE OR EXIT 37
13.2 INSTALLATION B AUTOMATIC ENTRY OR EXIT 38
13.3 INSTALLATION C CONTROLLED ENTRY AND EXIT 39
13.4 INSTALLATION D CONTROLLED ENTRY AND AUTOMATIC EXIT 40
14. ERROR HANDLING 41
To Next Page
Loading...
