2. From the PQ MAIN MENU, select "b" to begin a job and answer the questions
provided or simply press enter for each of the entries.
3. From the PQ MAIN MENU, select "I" to import (download) the data from the
PQ100.
4. Connect the cable provided from your computer to the UTILITY ADAPTER port
on the front of the PQ100. NOTE: THE PQ100 MUST BE AT THE "MAIN
IDLE DISPLAY" FOR THE DOWNLOAD TO WORK.
5. When the download is complete you may then select "s" from the "PQ MAIN
MENU" to view the file data.
To Next Page
Loading...