4.3 Dimensions and Weights (PQ100 Main Unit Only)
Dimensions:
Height: 5.3" (13.46cm)
Width: 9.9" (25.15cm)
Depth: 9.7" (24.64cm)
Weight: 19 Lbs. (8.63Kg)
4.4 Electrical Specifications
Main Battery- 12V 12Ah Short Circuit Protected
Clock Battery- 3.6V Lithium Cell
Clock Battery Life- 2 Years
Motor Drive- High Efficiency Pulse Width Modulator
Flow Rate Measurement- Mass Flow Sensor
Serial Data Signals:
Outputs- 9V Nom.
Inputs- 30V Max.
Charging System- 120VAC (60 Hz) or 240VAC (50 Hz)
Note: The PQ100 can run from the Charger.
4.5 Hardware Requirements for PQ Software
IBM XT, AT or 100% Compatible Clone
MS-DOS Operating System version 2.1 or greater
Minimum one 3.5, 5.25, Low or High Density Floppy Drive
COM1 or COM2 RS232 Serial Port for Downloading
(Not required for Correction Calculator)
Any Video Adapter Configuration
Hard Disk is preferred but not required
For Printouts: All printouts are directed to LPT1 as generic ASCII text with no special
printer functions. This means that redirection can be accomplished using the MS-DOS
function "MODE" and that any printer will work.
To Next Page
Loading...
Need help?
General